tip part造句
例句与造句
- turning tools with carbide tips part 3 : internal tools
硬质合金车刀第3部分:内表面车刀 - turning tools with carbide tips part 2 : external tools
硬质合金车刀第2部分:外表面车刀 - turning tools with carbide tips part 1 : designation and marking
硬质合金车刀第1部分:代号及标志 - in addition, unipoint s revolutionary tip part was born out of the most advanced cold forging theory-based metal mold design and manufacturing technologies
unipoint的生命先端部分也是按照最先端的冷锻理论根据模具设计制作技术而生产出来的。 - 2 % 22 % and 29 % respectively less than using other three knives at cutting speed of 500mm / min when the moisture contents of rootstalks was 48.2 % . the cutting forces were tested at four different parts of rootstalk that were the middle part along a radius, the tip part along a radius, the middle part along axis and the stalk part along a radius, and the force at the middle along a radius is the largest and increase 32 % 45 % 111 %, respectively more than at the other three parts . the force increase 37 % to cut the rootstalks from the areas one crop a year more than that from two crops a year
试验结果表明，根茬含水率愈高，剪切力愈小，根茬含水率与剪切力近似为二次曲线关系；刀片剪切速度愈快，剪切力愈小；凸曲线、斜线、凹曲线和直线四种不同的刀刃曲线对整株根茬剪切力依此由小到大，凸曲线和斜线剪切时有一定程度的滑切作用，所以剪切力相比较小，当根茬含水率为48.2，剪切速度500mmmin时，与其他三种曲线相比凸曲线型刀刃的剪切力依次分别减少了7.2、22和29；对根茬中部、梢部和根部的剪切力，在相同试验条件下，径向中部最大，比梢部，轴向根部和根部茎秆所需剪切力分别增加32、45和111；当含水率为48.2，刀片的剪切速度为500mmmin时，一年一熟玉米根茬比一年两熟的玉米根茬剪切力增大37。 - It's difficult to find tip part in a sentence. 用tip part造句挺难的